Table of Contents
Advertisement
Document ID: 2098080
15. Remove the fuel rail mounting bolts.
Caution:
• Use care when servicing the fuel system components, especially the fuel injector
electrical connectors, the fuel injector tips, and the injector O-rings. Plug the inlet and
the outlet ports of the fuel rail in order to prevent contamination.
• Do not use compressed air to clean the fuel rail assembly as this may damage the fuel
rail components.
• Do not immerse the fuel rail assembly in a solvent bath in order to prevent damage to
the fuel rail assembly.
Note: If an injector becomes separated from the rail and remains in the cylinder head,
replace the injector O-ring seals and the retaining clip.
16. Remove the fuel rail with the fuel injectors attached.
17. Remove the fuel injector retaining clips.
18. Remove the fuel injectors by pulling down and out.
19. Discard the fuel injector O-rings.
Installation Procedure
http://localhost:9001/si/showDoc.do?docSyskey=2098080&pubCellSyskey=124968&pubO...
Page 4 of 7
7/5/2010
Hide quick links:
Advertisement
Table of Contents
