Document ID: 2098080
4. Disconnect the electronic throttle control connector.
5. Disconnect the intake air temperature sensor.
6. Disconnect the camshaft position sensor.
7. Disconnect the manifold absolute pressure sensor.
8. Disconnect the fuel injector harness connectors.
9. Remove the purge solenoid valve to intake manifold hose.
10. Remove the MAP sensor vacuum hose.
11. Remove the upper intake manifold bracket bolts.
12. Remove the upper intake manifold bracket.
http://localhost:9001/si/showDoc.do?docSyskey=2098080&pubCellSyskey=124968&pubO...
Page 2 of 7
7/5/2010