Table of Contents
Advertisement
Document ID: 2098058
4. Disconnect the electronic throttle body connector.
5. Disconnect the coolant hoses from the electronic throttle body.
6. Remove the throttle body retaining bolts.
7. Remove the throttle body and discard the gasket.
Installation Procedure
Caution: Use care when cleaning the old gasket from the aluminum surfaces in order to
prevent damage to the sealing surfaces.
1. Clean the gasket mating surface on the intake manifold.
http://localhost:9001/si/showDoc.do?docSyskey=2098058&pubCellSyskey=124952&pubO...
Page 2 of 4
7/5/2010
Hide quick links:
Advertisement
Table of Contents
