Find Handset; Speed Dialing - Radio Shack 43-3872 User Manual

2. To hang up, press
the corded handset to the base. The
handset(s) will still be connected to the
call.
From a second handset
1. Press
TALK/FLASH
handset to join the call.
2. To hang up, return the handset to the
cradle or press
The base or other handset will still be
connected to the call.

FIND HANDSET

To locate the handset, press the
key on the base when the phone is in
standby mode. All registered handsets beep
for 60 seconds, and
the handset display. To cancel paging,
press any key on the handset or the
soft key on the base. Ô
CANCEL

SPEED DIALING

You can program up to ten speed dial
numbers in each handset. You must
program a speed dial number before you
can use the speed dialing feature. When the
phone is in standby mode, press and hold a
number key ( ) associated with the speed
0-9
dial until the phone number appears, and
then press
TALK/FLASH
on the base). The number stored
SPEAKER
in the speed dial (SPD1 - SPD0) is dialed.
or return
SPEAKER
or on the
SPEAKER
on the handset.
END
PAGE
Paging appears on
or (or the
SPEAKER
Ô
NOTE
soft
If the battery pack is
completely drained, the
handset will not beep when
paging.
Ô
37