Battery Pack - Radio Shack 43-3872 User Manual

Insert the supplied
AC adapter's barrel
plug into the
DC IN
jack on the back
9V
of the charger.
Route the cord
through the strain
relief slot and plug
the adapter into a
standard AC outlet.
C
ONNECTING
B P
ATTERY ACK
The phone comes with a rechargeable
nickel-metal hydride (Ni-MH) battery pack in
the handset, but not connected. Before
using your phone, you must connect the
battery pack, then charge it for about 15–20
hours.
1. Press down and slide off the battery
compartment cover.
2. Lift the battery pack out of the
compartment.
3. Plug the battery pack's connector into
the socket in the compartment (the
connector fits only one way), then place
the battery pack in the compartment.
4. Replace the cover.
To charge the battery pack, place the
handset on the charger. The
indicator on the charger lights.
Recharge the battery pack when
Low Battery flashes on the display.
If you have trouble replacing the battery
pack, take the phone to your local
RadioShack for assistance.
/C
HARGING THE
CHARGE
13