Radio Shack 43-3872 User Manual page 26

Ô
NOTE
Make sure to perform the
Handset Registration after
de-register the handset.
26
1. Press
on the base). Select the Global Setup
menu, and then the Dial Mode
submenu.
2. Press
(the initial setting is Tone).
3. Press
on the base). You will hear a
confirmation tone.
System Reset (Handset only)
System Reset is used to clear the handset's
ID from the main base unit, or the base ID
from the handset.
De-register the Handset
Deregister HS clears the handset ID from
the base. Use this option, for example,
when you change the digital security code.
1. Press
on the base). Select the System Reset
menu, and then the Deregister HS
submenu.
2. Press
de-registered from the list, and then
press
appears.
3. Press
SELECT/
confirmation tone.
When de-registration is complete,
Deregistration Complete
appears.
4. After de-registering the handset, move to
Ô
"Handset Registration" below. Ô
(or the
MENU/DEL
to select Tone
(or the
SELECT/
MENU/DEL
(or the
to select the handset ID to be
. Deregister HS?
SELECT/
to select Yes
. You will hear a
soft key
MENU
or Pulse
soft key
OK
MENU
soft key
, and then press