Mute Microphone; Tone Dialing Switch-Over - Radio Shack 43-3872 User Manual

Ô
NOTES
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing (see
page 38).
34

MUTE MICROPHONE

You can temporarily mute the microphone
so that the caller cannot hear you.
1. During a call, press
MENU
2. Press
and then
key on the base).
appear in the display.
To cancel muting, repeat above step
again.
TONE DIALING
Ô
SWITCH-OVER
If your telephone company requires pulse
dialing, you can switchover to tone dialing
after the call connects. This feature is useful
when you need tone dialing to use any
automated menu systems, such as
telephone bank tellers, telephone
prescription refills, customer support
menus, etc. Ô
If your phone is set to pulse dialing mode,
make your call normally. Once your call
connects, press the
digits you enter from then on will be sent as
tone digits. When this particular call ends,
the phone automatically returns to pulse
dialing mode.
MENU/DEL
soft key on the base).
to move the pointer to
(or the
SELECT/
Mute On
Mute Off appears.
/TONE/<
*
(or the
,
MUTE
soft
OK
and
key. Any