Volvo 240 1993 Owner's Manual page 114

1993 Volvo 240
section.
WWW.MANUALS.WS
pg. 74 Engine Oil, 10,000-mile (16,000-km) oil/oil filter change interval
Oil quality
Meeting API specification SG
Oil with designation SG/CD complies with this requirement.
Oil with a different quality rating may not provide adequate engine protection. For best fuel economy
and engine protection, consult with your authorized Volvo dealer for recommended oils.
Viscosity (stable ambient temperatures):
Do not use oils with other viscosity ratings. The use of incorrect viscosity oil can shorten engine life.
Volvo recommends the used of energy-conserving oils. Look for the API label. Synthetic oils complying
with oil quality requirements are recommended for driving in areas of sustained temperature extremes
(hot or cold), when towing trailers over long distances or for prolonged driving in mountainous areas.
Volvo does not recommend oil additives, as they can adversely affect the engine.
Volvo recommends the use of oils with the American Petroleum Institute (API) label. This
label certifies that the oil conforms to the applicable standards and specifications of the
API.
Capacity
Including oil filter: 4.0 US qts = 3.85 litres
Check oil level when filling fuel.
SAE 15W/40 is recommended for use in driving conditions that raise oil temperature and increase oil
WWW.MANUALS.WS
consumption. (i.e., mountain driving, trailer towing)
file:///K|/ownersdocs/1993/1993_240/93240_71.html (5 of 8)12/30/2006 9:42:12 AM