Warranty Conditions - infaco Powercoup PW2 Assembly Instructions Manual

Do not approach the cutting chain with any part of the body when the tool is running. Before starting up the tool,
make sure the cutting chain is not touching anything. One moment of distraction when using the tool can lead to
your clothing or a body part being hooked to the cutting chain.
Always hold the rear tool handle with the right hand and the front handle with left hand. Holding the tool with
this position reversed increases the risk of physical injury and should be avoided.
Wear safety eyewear and hearing protection. Additional protective equipment for the head, hands, legs and feet
is recommended. Suitable protective clothing will reduce physical injury caused by flying debris or accidental
contact with the cutting chain. Never use the tool in a tree. Starting up the tool in a tree may cause an accident
leading to physical injury. Always maintain a firm footing and only use the tool when standing on a fixed, safe
and level surface. Slippery or unstable surfaces can cause a loss of balance or loss of control of the tool.
When cutting a branch that is under strain, be careful of the risk of a backlash. When the tension in the wood
fibres is released, the branch can spring back and strike the operator and/or push the tool out of control. Be
extremely careful when cutting brush and young shrubs. Fine materials can grip the cutting chain and send them
in your direction in a whiplash movement, or they can make you lose your balance under the effects of tugging.
Hold the tool using the front handle with the tool powered off and kept away from body parts.
When transporting or storing the tool, always fit the chain cover on it. Suitable handling of the tool will reduce
the probability of accidental contact with the moving cutting chain.
Follow the instructions for lubrication accessories and chain tensioning and replacement. A chain that has
incorrect tension and lubrication can either snap or increase the risk of rebounds.
Keep the handles dry, clean and free from oil and grease. Greasy, oily handles are slippery and can cause loss of
control.
Only cut wood. Do not use the tool for purposes for which it was not intended.
For example: do not use the tool to cut plastics, masonry or construction materials other than wood. The use of
the tool for operations other than those it was designed for can lead to hazard situations.

WARRANTY CONDITIONS

The POWERCOUP PW2 handle has a warranty for a period of two years against all manufacturing faults and
defects.
This warranty corresponds to normal use of the tool and excludes:
- Damage due to poor maintenance or a lack of maintenance,
- Damage due to inappropriate usage,
- Damage due to normal wear and tear,
- Tools which have been dismantled by unauthorized repairers,
- External forces (fire, flooding, lightning, etc.),
- Damage from tool being dropped or from other impact,
- Tools with warranty cards not returned at the time of purchase,
- Tools used with a battery or charger other than those manufactured by INFACO.
INFACO shall not remit payment for any monetary loss incurred for the time the tool is unavailable during
repairs.
Ref.: NOT TR8 34 Index 01.