infaco Powercoup PW2 Assembly Instructions Manual page 33

Safety equipment such as dust masks, non-slip safety footwear, hard hats or ear protection used in the correct
circumstances will reduce physical injuries.
Avoid any unintentional start-ups. Make sure the switch is in the off position before connecting the tool to the
battery block, picking it up or carrying it.
Carrying tools with the finger on the switch, or connecting tools with the switch in the on position is a cause of
accidents.
Do not hurry. Always maintain a suitable position and balance.
This makes it possible to keep the tool under control in unexpected situations.
Wear appropriate clothing. Do not wear loose clothing or jewellery.
Keep hair, clothing and gloves away from moving parts.
Loose clothing, jewellery or long hair can become entangled in moving parts.
4) Use and care of the tool
Do not force the tool. Use the tool adapted to your application. The tool will be more effective and safer when
used at the speed for which it was built.
Do not use the tool if the on-off switch is not in working order. Any tool that cannot be controlled using the
switch is dangerous and must be repaired.
Disconnect the plug from the tool's battery block power supply source before making any adjustments, changing
accessories or before storing the tool. These preventive safety measures reduce the risk of the tool starting up
unexpectedly.
Keep tools not being used out of the reach of children and do not allow persons having no knowledge of the tool
or these instructions from using it.
Tools are dangerous in the hands of novice users.
Comply with tool maintenance. Check that there is no misalignment or jamming of moving parts, no broken
parts and no other circumstances that might impact the tool's operation. When damaged, have the tool repaired
before using it. Many accidents are caused by incorrectly maintained tools.
Keep cutting tools sharpened. Correctly serviced cutting tools with sharp cutting components are less likely to
jam and are easier to control.
Use the tool, accessories and blades, etc. in compliance with these instructions, taking into account working
conditions and the task to be carried out.
The use of the tool for operations other than those it was designed for can lead to hazard situations.
5) Maintenance and servicing
Have the tool serviced by an INFACO qualified repair shop and only use INFACO brand spare parts. This will
guarantee that tool safety is maintained.
Ref.: NOT TR8 33 Index 01.