Table of Contents
Advertisement
Operating the System
Arming the System from the Reader or Code Keypad
Arming the system with a key
1. Press and hold the key button and hold the key up to the reader for 3 seconds until you hear a
short signal from the buzzer.
The green LED starts to light up, signaling that the system is currently disarmed.
The red LED starts to flash, signaling that the arming process has commenced.
Further reader signals (LED) follow as described in the left-hand box (arming successful) or
in the right-hand box (arming unsuccessful).
The green LED is deactivated.
r
The
ed LED and the buzzer are acti-
vated for 2.5 seconds (continuous
signal).
System arming successful.
Arming the system with a code
1. Enter your user number + user code.
The green LED starts to light up, signaling that the system is currently disarmed.
The red LED starts to flash, signaling that the arming process has commenced.
Further keypad signals (LED) follow as described in the left-hand box (arming successful) or
in the right-hand box (arming unsuccessful)
The green LED is deactivated.
The red LED and the buzzer are acti-
vated for 2.5 seconds (continuous
signal).
System arming successful.
The red LED is deactivated.
The green LED lights up for 5 seconds.
The buzzer simultaneously emits an in-
terval signal for 5 seconds.
System arming unsuccessful. See the
table "Operating Problems During Normal
Operation" for assistance.
.
The red LED is deactivated.
The green LED lights up for 5 seconds.
The buzzer simultaneously emits an in-
terval signal for 5 seconds.
System arming unsuccessful. See the
table "Operating Problems During Normal
Operation" for assistance.
34
Advertisement
Table of Contents
