App Settings - Omegon Universe2go Instructions Manual

In order to select or activate a menu
option you must first move the hand
into the middle, which is highlighted
by a frame. You should now make
sure that the little hand also stops in
the middle by simply looking straight
ahead. You can activate the setting by
tilting your head to the right.
By tilting your head to the left you can
move back through the menu or close
the menu without choosing anything.
When you start the menu for the first
time, the system will provide an audio
explanation, so that you can get to
know the operation step by step.

5. App settings

You can make changes of the most
important settings in the app under
the menu point "SETTINGS". You
can find more setting options (in the
20
iPhone) outside the app under the
settings of your smartphone and (in
Android) at the beginning of the app
behind the cogwheel symbol at the
bottom right hand corner.
Left eye: Determines on which eye
the display is laid if the display only
appears on one eye. (Set automatically
during calibration.)
Irrelevant if "Both eyes" is activated.
Both eyes: Display on both eyes.
Automatically activated if the device
is used by day, since the restriction is
only beneficial at night.
3-D presentations are only possible if
"Both eyes" is activated.
Search objects below horizon: Allows
you to search for objects below the
horizon.
Reset help audio: All help texts are
repeated again if activated.
Calibrate gyro: Universe2go checks
and calibrates the gyro sensor at the
start.
Eye distance: Enter your eye distance
here in millimetres. There is a
measurement guide in the FAQs on
the website www.universe2go.com.
Calibrate eye distance: If you do
not know your eye distance, you can
determine it with the help of the
Universe2go eye distance calibration.
Longitude: Determined automatically.
Can be entered manually if GPS is not
available (e.g. if the smartphone
flight mode is activated) . The entry
must be made in angular degrees.
Latitude: Determined automatically.
Can be entered manually if GPS is not
available (e.g. if the smartphone flight
mode is activated) . The entry must be
made in angular degrees.
(RAD = longitude in degrees/ 57.3)
Brightness settings: Enter value
between 0.0 and 1.0 or set slide
control.
Currently only available for iPhone:
Reset calibration: Carry out
calibrations (screen & eye distance)
again at the next start.
21