Heat & Glo SLR-D Owner's Manual page 60

PILOT SHIELD
BURNER
TRACKS
Figure 14.3. Placing Glass Rock Media on Pilot Shield
WARNING! Risk of Fire! DO NOT place glass rock me-
dia directly in front of the pilot assembly or between the
burner tracks over the burner ports.
NOTICE: Care should be taken to avoid placing glass
rock media between the left, right and back edges of the
media tray and the firebox. Blocking this gap may cause
an undesirable flame appearance. See Figure 14.4.
NO GLASS ROCK MEDIA BETWEEN DASHED LINES.
Figure 14.4. Maintaining Media Tray Air Spaces.
60 Heat & Glo • SLR-D • 2333-900 Rev. F • 9/17