Table of Contents
Advertisement
Chapter2
menu .
To automatically set up the secure wireless connection,
your Access Point must be allow WPS .
a .
Press the up or down arrow to highlight Run WPS .
Press the select button .
Press the Setup button on the base station, until it
b .
starts blinking .
c .
Press the select button . The handset and Access
Point will look for each other . If the pairing is
successful, the message, "WPS linked" will display
on the handset .
When you are done, press Back to return to the Settings
menu .
Wireless-G IP Phone
Main Menu > SMS
Use SMS to compose and send a text message up to 256
characters . You can also save messages that you have
received .
Main Menu > SMS
1 .
When the handset is in the standby mode, press the
select button to see the Main Menu options . Press the
left or rght arrow to select SMS, if it is not on-screen .
Main Menu > SMS > Inbox
Press the select button to display the SMS Management
2 .
menu .
To view a message, press the up or down arrow to
highlight Inbox and press the select button .
Main Menu > SMS > Compose
a .
To compose a message press the up or down arrow
to highlight Compose and press the select button .
b .
Using the keypad, enter the phone number you
want to send the message to and press the down
arrow to go to the text field . Type your message
using the keypad . Use the right soft key to delete
characters . When you are finished, press OK (the
select button) .
Phone Menus
Advertisement
Table of Contents
