5500 ProFlex
o Double click on Internet Protocol Version 4 (TCP/IPv4) to enter the IP
settings of your adapter.
o Make sure the
selected.
o Click
OK
GENERAL CONFIGURATION
Open your network browser, and go to:
-
The landing page with information about the device will appear. On this screen,
-
you see information about the device type, name, ID, serial number, firmware
version, hardware version and device features. In the top right corner, you will
see the device status. If the status "LED" is green, there are no alarms. When
you move your cursor over the status "LED", the alarm status will appear.
'Obtain an IP address automatically'
to save the settings.
checkbox is
8