5500 ProFlex NTRODUCTION 1.1. Product description The ProFlex satellite module has 4 inputs allowing the reception of 4 different satellite bands per module. Because the module has 8 satellite tuners and a built-in multiswitch, reception of 8 different transponders coming from any of the 4 input satellite bands is possible.
5500 ProFlex 1.2. Typical installation The ProFlex can be used to provide high quality satellite television in a wide range of projects, both in the hospitality as in the residential market. Typical buildings or infrastructures where the ProFlex can be used include, but are not limited to: Large and small hotels, hostels, bed and breakfasts, holiday parks Hospitals, resthomes, prisons Large and small multi-dwelling units with an international public, settlements...
5500 ProFlex 1.6. Mounting Proper installation is critical to system performance. It is particularly important to install the ProFlex correctly in order to receive optimal signal quality. Install the ProFlex in a well ventilated and cool room. In case the ambient temperature of the room is higher than 30°C (or 91°F), the ProFlex must be used in combination with a fan unit (Ref.
5500 ProFlex 2. C ONFIGURING THE LEX USING THE WEBINTERFACE MINIMAL SYSTEM REQUIREMENTS The WebGUI is supported by the following web browsers: Google Chrome Mozilla Firefox Internet Explorer Safari Make sure to use the most recent version of the browser. When using a different browser, we cannot guarantee a correct functioning of the interface.
5500 ProFlex o Double click on Internet Protocol Version 4 (TCP/IPv4) to enter the IP settings of your adapter. o Make sure the ‘Obtain an IP address automatically’ checkbox is selected. o Click to save the settings. GENERAL CONFIGURATION Open your network browser, and go to: The landing page with information about the device will appear.
Page 10
5500 ProFlex By clicking on login, you can log in to the module. Use the password “admin”. ! change the password as soon as you log in to the module via Management Port”! After logging in, the Device information window will appear again. The menu structure of the web interface can be found in the left column.
Page 11
5500 ProFlex Firmware Upgrade: o Click on the BROWSE button, and open the upgrade file. Click UPLOAD send the file to the device, this will install the new firmware on the device License management: o For first configuration, the device license is already set and should not be altered.
5500 ProFlex DEVICE CONFIGURATION It is of utmost importance that your device is configured in a right way in order to make the ProFlex installation successful. To do so, follow the below mentioned steps carefully. 1. Input Define the LNB settings (INPUT > LNB > INPUT 1-4) o Input: Sequence number of the input (also indicated on the front of the actual module) o Label: custom label for each input (e.g.
Page 13
5500 ProFlex Define the settings for each of the 8 tuners (INPUT > TUNER > TUNER 1-8) o Input: this refers to the LNB inputs; make sure the transponder frequencies you choose correspond to the right polarity of the LNB inputs o Frequency: choose the frequency of the transponder you want to receive...
Page 14
5500 ProFlex Check for each tuner the configuration of your streams (INPUT > STREAM > STREAM 1-8) o The streams will show you which services are included in each of the tuned transponders. o A lot of details of each service can be found here.
5500 ProFlex 2. Output Set all the MPTS* (OUTPUT > MPTS > MPTS 1-8) o Stream: choose the input stream you set in INPUT o Name: choose the name of the stream o Path: choose the routing of the service: FTA (Free-to-Air) – CAM 1 – CAM 2 o Priority: provides the possibility to prioritize some services (e.g.
Page 16
5500 ProFlex Define the networks (OUTPUT > NETWORK > NETWORK 1-4) o ONID: The Original_Network_ID (ONID) is defined as the “unique identifier of a network”, check the spreadsheets on http://www.dvbservices.com to find your correct ONID o TSID: Choose your Transport Stream ID o NID: Choose your Network ID o Network Name: set your network name o Version: set the version of the network (value between 0 and 31)
Page 17
5500 ProFlex Set all the Mux* (OUTPUT > MUX > MUX 1-4) Frequency(kHz): Here you can select the frequency you want to transmit on. For DVB-T: 47000 to 862000, for DVB-C: 47000 to 1002000 Level(dBm): define the level of RF (between -25 to -40) o Constellation: Choose the type of constellation you want to use.
5500 ProFlex 3. CAM 3.1 Set the CAM configurations for the ProFlex (CAM > CAM 1-2) o Only do this if you use a ProFlex module with the CAM feature enabled o Type: To prevent network overflow, it is important to choose the type of the CAM (this can be found on you CAM-card: Low-speed (legacy CAM) up to 50 Mbps ...
5500 ProFlex 3. T ECHNICAL PECIFICATIONS Input Inputs 4 x satellite (4 satellite bands per module) 1 IP Gigabit input (4 MPTS transport streams per module) Integrated Yes, allows flexible routing of satellite programs to multiswitch multiplexes (QAM or QOFDM) Configuration Built-in webserver or optional UUI configuration software...
5500 ProFlex 4. S AFETY NSTRUCTIONS Read these instructions carefully before connecting the unit To avoid any risk of overheating: Install the unit in a well aery location and keep a minimum distance of 15 cm around the apparatus for sufficient ventilation ...
5500 ProFlex 5. C ONDITIONS OF WARRANTY Unitron N.V. warrants the product as being free from defects in material and workmanship for a period of 24 months starting from the date of production indicated on it. See note below. If during this period of warranty, the product proves defective, under normal use, due to defective materials or workmanship, Unitron N.V, at its sole option, will repair or replace the product.