Johansson proflex 5500 User Manual page 10

5500 ProFlex
By clicking on login, you can log in to the module. Use the password "admin".
-
! change the password as soon as you log in to the module via Management Port"!
After logging in, the Device information window will appear again. The menu
-
structure of the web interface can be found in the left column. In the picture
below, the different functionalities of the different menu buttons are described.
The following actions are critical for optimal system performance:
-
 Management port:
o Define the hostname and IP settings of your management port:
Here you can configure the hostname of the module. This name
can be used to access the module by simply typing it into your
browser as the address and surf to it. This is more convenient
than using the IP address.
o Change your password to secure your module for unauthorized users

Streaming port:
o Define the IP settings of your streaming port.
o Set Time-to-Live according to your network needs (default is 64)
o Set Encapsulation to UDP or RTP
 Reset device:
o If it is at issue, go to the Reset Device tab to reboot your ProFlex. Via
this tab you can also reset certain settings or restore the default
configurations of your ProFlex. All settings can be reset to default by
means of a factory reset.
o The ProFlex can also be manually reset. This can be done by inserting a
pin (e.g. a paperclip) in the small opening in the front plate of the
ProFlex right above the letters "GND" (between the power and alarm
LEDs).
By pressing this button less than 2 seconds (LED above

management port will turn RED), the device will reboot
By pressing this button longer than 5 seconds (LED above

management port will blink GREEN), the device will reboot, the IP
settings will be reset and the password will be reset to the
default, i.e. "admin".
9