5500 ProFlex
Firmware Upgrade:
o Click on the
send the file to the device, this will install the new firmware on the
device
.
License management:
o For first configuration, the device license is already set and should not
be altered.
o For a license upgrade, first upload the license file* and then activate the
device license via "Activate Device License" and press Apply. Finally,
reboot the device to make sure the firmware upgrade succeeds.
* the procedure to obtain a new license file is to send your current license identifier (LID) to
UnitronGroup and request for a new configuration according to your needs
Device Settings:
o Go to this tab if you want to import a settings file from another module
(click on choose file and select the .exp file on your computer), or
export a settings file (so you can later upload it to another module).
o This tab can also be used to store and restore the device settings
Device configuration
o This action is discussed below
Logout:
o When you are finished configuring the ProFlex, click logout to secure
the web interface for unauthorized users.
BROWSE
button, and open the upgrade file. Click
UPLOAD
to
10