Chapter 9 Configuring Span On Svc Interfaces - Cisco MDS 9216 Configuration Manual

Configuring SPAN on SVC Interfaces
Effective SAN-OS Release 1.3(x) Switched Port Analyzer (SPAN) capabilities are also available on the
Caching Services Module (CSM) module.
The SPAN feature is specific to switches in the Cisco MDS 9000 Family. It monitors network traffic
though a interface. Traffic through any SVC interface can be replicated to a special port called the SPAN
destination port (SD port).
This chapter includes the following sections:
About SVC as a SPAN Source, page 9-2
•
Configuring SVC Interfaces as SPAN Sources, page 9-2
•
78-16119-01, Cisco MDS SAN-OS Release 1.3
C H A P T E R
Cisco MDS 9000 Family SAN Volume Controller Configuration Guide
9
9-1