Svc Role Authorization - Cisco MDS 9216 Configuration Manual

SVC Role Authorization

For ftp://user@171.71.188.111, please enter password:
SVC reimage going on. Please wait
m9000-ek9-csm-svc-mz.1.3.1.bin
svc 2/2 software reimage succeeded
All prior information on the node is lost with each install.
Verify that the CSM node booted successfully, by issuing the show module command.
Step 3
switch# show module
Mod
---
2
4
5
6
Mod
---
2
4
5
6
Mod
-------- -----------------------------
2
2
Mod
---
2
4
5
6
* this terminal session
The initial setup can only be performed at the CLI. You can continue to configure other software
Tip
features, or access the switch after initial configuration by using either the CLI or the Device Manager
and Fabric Manager GUIs. To use the Cisco MDS 9000 Fabric Manager, refer to the Cisco MDS 9000
Family Fabric Manager User Guide.
SVC Role Authorization
By default, two roles exist in all Cisco MDS switches:
•
•
The two default roles cannot be changed or deleted.
Cisco MDS 9000 Family SAN Volume Controller Configuration Guide
2-4
Ports Module-Type
----- ------------------------------- ------------------ ------------
0 Caching Services Module
8 IP Storage Services Module
0 Supervisor/Fabric-1
0 Supervisor/Fabric-1
Sw Hw
----------- ------
1.3(1) 0.3
1.3(1) 0.206
1.3(1) 0.0
1.3(1) 0.0
Application Image Description
svc-node1
svc-node2
MAC-Address(es)
--------------------------------------
00-05-30-00-93-e2 to 00-05-30-00-93-e6
00-05-30-00-9d-de to 00-05-30-00-9d-ea
00-05-30-00-52-f2 to 00-05-30-00-52-f6
00-05-30-00-53-3e to 00-05-30-00-53-42
SVC administrator (svc-admin)— Has permission to view the entire configuration and make
SVC-specific configuration changes within the
SVC operator (svc-operator)—Has permission to view the entire configuration. The operator
cannot make any configuration changes.
100% |*****************************| 45408 KB
Model
DS-X9560-SMC
DS-X9308-SMIP
DS-X9530-SF1-K9
DS-X9530-SF1-K9
World-Wide-Name(s) (WWN)
--------------------------------------------------
--
20:c1:00:05:30:00:a7:9e to 20:c8:00:05:30:00:a7:9e
--
--
Application Image Version
-------------------------
1.3(1) <-------Node one on the CSM
1.3(1) <-------Node two on the CSM
Serial-Num
----------
JAB06xxxx10
JAB064605aa
switch(svc)
Chapter 2 Getting Started
Status
ok
<---------- CSM
ok
active *
ha-standby
prompt.
78-16119-01, Cisco MDS SAN-OS Release 1.3
00:55