VeriFone Commander Site Controller Configuration Manual page 2

First Data Rapid Connect EMV Configuration Guide
for Inside Contact EMV
This guide provides detailed information on how to configure the Inside Contact
EMV feature on the Verifone Commander Site Controller for First Data network
sites.
All references to EMV in this document mean Inside Contact EMV. This document
does not cover or address Contactless EMV.
Verifone's implementation of EMV involves the VIPER EPS and the associated
MX800 Series and MX900 Series PINpads only. As the POS terminals are not
involved in EMV processing, no POS overviews or configurations are covered in
this document.
Refer to the Inside Contact EMV Feature Reference for complete details on
configuring and using Verifone solutions for EMV.
Verifone, Inc.
88 West Plumeria Drive
San Jose, CA 95134
Telephone: 408-232-7800
http://www.verifone.com
© 2016 Verifone, Inc. All rights reserved.
No part of this publication covered by the copyrights hereon may be reproduced or copied in
any form or by any means - graphic, electronic, or mechanical, includingphotocopying, taping,
or information storage and retrieval systems - without written permission of the publisher.
The content of this document is subject to change without notice. The information contained
herein does not represent a commitment on the part of Verifone. All features and
specifications are subject to change without notice.
Verifone, Ruby SuperSystem, and Secure PumpPAY are registered trademarks of Verifone, Inc.
Ruby Card, iOrder, and Commander Site Controller are trademarks of Verifone. All other brand
names and trademarks mentioned in this document are the properties of their respective
holders.
i