6.4.18 Resetting An Analog Channel - AudioCodes MP-124 User Manual
Mediapack series, analog voip media gateways, mgcp & megaco protocols
Hide thumbs
Also See for MP-124:
- User manual (504 pages) ,
- Installation manual (58 pages) ,
- Fast track manual (44 pages)
Table of Contents
Advertisement
User's Manual
6.4.18 Resetting an Analog Channel
Note:
applicable to MediaPack.
The 'Home' page allows you to inactivate (reset) an FXO or FXS analog channel. This is
sometimes useful in scenarios, for example, when the device (FXO) is connected to a PBX
and the communication between the two can't be disconnected (e.g., when using reverse
polarity).
To reset a channel:
Click the required FXS or FXO port icon, and then from the shortcut menu, choose Reset
Channel; the channel is changed to inactive (i.e., LED is displayed in grey).
Version 6.6
The following sub-section on Resetting an Analog Channel is only
Figure 33: MP-11x - Reset Channel
6. Configuration Using the Web Interface
65
MediaPack Series
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MP-124 and is the answer not in the manual?