6.4.11 Mediapack Home Page - AudioCodes MP-124 User Manual

Item# / Label
Alarms Displays the highest alarm severity raised (if any) by the device:
Green = no alarms.
Orange = alarms have been raised and are listed in the 'Active Alarms' table.
To view the list of alarms in the 'Active Alarms' table, click the Alarms area (refer to
Viewing the Active Alarms Table on page 61).
Channel / Displays the status of the ports (channels):
Ports
(red): line not connected (only applicable to FXO devices)
(grey): channel inactive
(blue): handset is off-hook
(green): active RTP stream
You can also view the channel's port settings (refer to Viewing Channel
Information), reset the port (refer to Resetting an Analog Channel on page 65), and
assign a name to the port (refer to Assigning a Name or Brief Description to a Port).
Uplink (MP- If clicked, the 'Ethernet Port Information' page opens, displaying Ethernet port
11x) configuration settings (refer to Viewing Ethernet Port Information).
LAN (MP-124
Fail Currently not supported.
Ready Currently not supported.
Power Always lit green, indicating power received by the device.

6.4.11 MediaPack Home Page

To navigate to the Alarm Table, click on the alarms chassis. The Active Alarms screen
appears as shown below:
User's Manual
MediaPack Home Page Descriptions
Description
Figure 22: 8410 Alarms Table
60
MediaPack Series
Document #: LTRT-71405