Agent Ping - Siemens SCALANCE X204RNA Operating Instructions Manual

DHCP
Here, you specify whether or not the IP address can be obtained using the Dynamic Host
Configuration Protocol.
Syslog
Here, you specify whether or not events are sent to a Syslog server.
DCP
If you select this option, the device can be accessed and configured via DCP (PST Tool and
STEP 7).
SNTP
Enables / disables synchronization of the IE switch system time over an SNTP server in the
network.
DCP Read Only
If you select this option, the configuration data can only be read via DCP (PST Tool and
STEP 7).
Default gateway
If you require the IE switch to communicate with devices (diagnostics stations, e-mail
servers, etc.) in a different subnet, you will need to enter the IP address of the default
gateway here.
MAC address
The MAC address of the SCALANCE X-200RNA.
7.7.2

Agent Ping

Ping
Configuration of "Ping"
The "Ping" screen appears if you click the "Agent" folder icon. In this screen, you can send a
PING to another device in the network to check whether it can be reached.
SCALANCE X204RNA SCALANCE X204RNA EEC
Operating Instructions, , C79000-G8976-C294-03
Functional description and configuration using Web based Management
(PRP)
7.7 The Agent menu
69