Siemens SCALANCE X204RNA Operating Instructions Manual page 102

Approvals and marking
8.1 Approvals and marking
The product is designed for use in the following areas:
Area of application
Industry
Personal injury and damage to property may occur.
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
● Keep to the installation guidelines
● You can always find the latest documentation on the Internet!
● Working on the product
Note
The product was tested with a device that also complies with the standards listed above.
When operating the product with a device that does not comply with these standards,
adherence to the corresponding values cannot be guaranteed.
Explosion protection directive (ATEX)
The SCALANCE X204RNA device meets the requirements of the EC directive:
102
RF interference level
EN 61000 6 4: 2007
WARNING
The product meets the requirements if you adhere to the installation and safety
instructions contained in this documentation and in the following documentation when
installing and operating the product.
The current descriptions of the currently available products can always be found on the
Internet under the specified Internet pages:
– SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks
(http://support.automation.siemens.com/WW/view/en/8763736/) , Manual
– EMC Installation Guideline
(http://support.automation.siemens.com/WW/view/en/60612658) , Configuration
manual
To protect the product from electrostatic discharge, personnel must first discharge any
electrostatic charge from their body before touching the product.
Immunity to interference
EN 61000 6 2: 2005
SCALANCE X204RNA SCALANCE X204RNA EEC
Operating Instructions, , C79000-G8976-C294-03
(PRP)