System Select/Set Button - Siemens SCALANCE X204RNA Operating Instructions Manual

7.5.7

System Select/Set Button

Configuring the Select/Set button
On the SCALANCE X-200RNA, the SELECT/SET button is used to
● Change the display mode
● Reset to the factory defaults
● Define the fault mask and the LED display
You will find a detailed description of the individual functions available with the button in the
section "Set button (Page 27)".
On this page, the functionality of the Select/Set button can be restricted or fully disabled.
This is possible for the following three functionalities:
● Restore Factory Defaults
● Enable/Disable Reset
● Set Fault Mask
Figure 7-10 Select/Set button configuration
Enable Select/Set Functions
You can enable or disable the individual functions of the button by checking or unchecking
the relevant box.
SCALANCE X204RNA SCALANCE X204RNA EEC
Operating Instructions, , C79000-G8976-C294-03
Functional description and configuration using Web based Management
(PRP)
7.5 The System menu
57