Figure 7-16
Enable Link Down Monitoring
Select the check boxes of the ports whose connection status you want to monitor. If link
monitoring is activated, an error is signaled when there is no valid link at this port because,
for example, the cable is not plugged in or the connected device is turned off.
An error/fault can be signaled in the following ways depending on the configuration of the
SCALANCE X-200RNA: Signaling contact, fault LED, SNMP trap, entry in the log table and
the syslog.
SCALANCE X204RNA SCALANCE X204RNA EEC
Operating Instructions, , C79000-G8976-C294-03
Functional description and configuration using Web based Management
Fault Mask Link Down Monitoring
(PRP)
7.6 The X200 menu
65