Page 5
Step-by-step Twin installation – and commissioning Thank you for purchasing this Alfen charging station for electric vehicles! We advise you to carefully read the contents of this manual, to ensure a safe and proper installation and enable you to fully use all the advanced features of this product.
1332 AP Almere Product The Netherlands The charging station Status indications on the interface The undersigned, as Director of Alfen, hereby Using the charging station declares that the following product: 2.4 Technical specifications TWIN 4XL charging station equipped with 6mA DC detection 2.4.1...
1. SAFETY AND USAGE INSTRUCTIONS 1.1 Purpose and intended audience In the following cases, Alfen ICU B.V. shall not be liable The Alfen Twin charging station is exclusively intended in any possible way for any kind of damages while all...
Type number of the charging station consisting of the kWh meter platform name and the last five digits of the article Identification label number: (NG920)-(52501, 52502 of 52504) Isolating switch Serial number, unique number issued by Alfen for this Grid Connection Box (GCB) specific charging station Safety GCB Production date of the charging station Technical specifications of the charging station, such as...
2. PRODUCT 2.2 Status indications on the interface The Alfen Twin uses an interface equipped with LEDs to provide status indications of the charging station, and inform the user about starting and stopping the charging process. Image 4: Display of the Twin during a charging session (left) Status and information interface;...
2. PRODUCT 2.3 Using the charging station Plug & Charge – General authorization without charge card Start Stop RFID – Charging station with user authorization Start Stop Twin manual | Version 2.0 | December 2017...
RCD type A, 6mA DC detection Packing unit (PU) 1 piece Package content charging station Alfen Twin™, installation manual, assembly accessories and RFID charge cards (depending on selected options) System structure Twin model 2017 Twin 934452501 (3x25A GCB)
2. PRODUCT 2.4.2 Input / power supply NOTICE! Your installation must comply with the standards and regulations of the location (country) where it is located. The tables below are advisory and based on proper practical functioning of the charging stations; provided that all prerequisites are satisfied.
2. PRODUCT The charging station is equipped with a 6mA detection This protocol is repeated up to 3 times while the charging circuit per socket. The charging current is interrupted if a DC transaction remains active, after which the transaction will leakage current of 6mA or more is detected.
2. PRODUCT 2.4.7 Casing Type Charging column Mounting options Directly on solid underground or on optional metal or concrete pedestal Material (casing) Cold-rolled stainless steel 304 Color (casing) RAL 7043 (Traffic Grey B) Locking Lockable lever with space for two cylinder locks (not included) Standard master key included for door operating Dimensions (H x W x D) Casing...
3. INSTALLING AND CONNECTING Package content Content of the package of the charging station consists of: Alfen Twin installation manual and assembly accessories, RFID charge cards (depending on the selected options) 1X AlfenTwin 107335530 Cable clamp k24u 104565102 Wiska cable gland ESKV M12x1,5 104565103 Connection nut EMUG 12 M12x1.5...
Ensure that the following requirements for installing the Alfen Twin are satisfied: 3.3 Mechanical installation • The cable trajectory from the main distributor to the Use the following tools and materials to install the Twin: Alfen Twin (934452502) must be protected against • Spirit level overcurrent with: • Spade gG type fuses (or different pursuant to local standards •...
3. INSTALLING AND CONNECTING 3.4 Installation 3. Mount the charging station onto the pedestal with 4x threaded rod M10x60 + 4x nut M10 2. Place the gasket between the pedestal and the bottom of the charging station Grommet for mains cable Cable gland for earth cable originating at earth electrode 1.
3. INSTALLING AND CONNECTING a. Insert the 4 threaded rods M10x80mm into the Remove the sheath of the supply cable with a utility openings on the pedestal. knife and remove the sheaths of the separate wires b Apply the gasket over the threaded rods and the with a wire stripper;...
- Testing locking (locking and unlocking) - Internal relays are tested, switching is audible The LED interface flashes briefly; The red crosses flash twice; The Alfen Twin is now ready to use. If the charging station is configured to connect with an administration system, this will take place automatically and directly. The charging station may be configured further if desired. Use the Service Installer software application to gain access.
Services delivered by • Inbound/Outbound third parties are not part of the scope of delivery of Alfen. It might also be required to specify a MAC address. This is If, during the order process, you opted to use ICU Connect, registered on the inspection report of your charging station.
Once your account is created, Alfen will send you your login information. Did you forget to register while ordering ICU EZ? No pro- blem. If you opted to have your charging station configured for ICU EZ, your charging station is already registered and active in the administration system.
Need help?
Do you have a question about the Twin 934452504 and is the answer not in the manual?
Questions and answers