Makita M9509 Instruction Manual
Hide thumbs
Also See for M9509:
- Instruction manual (29 pages) ,
- Instruction manual (36 pages) ,
- Instruction manual (8 pages)
Related Manuals for Makita M9509
Summary of Contents for Makita M9509
- Page 1 INSTRUCTION MANUAL Angle Grinder M9509 M9510 M9511 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: M9509 M9510 M9511 Wheel diameter 100 mm 115 mm 125 mm Max. wheel thickness 4 mm 6.4 mm Spindle thread M10 x 1.5 M14 x 2 Rated speed (n)/ No load speed (n 11,000 min Overall length 276 mm Net weight 1.8 kg... -
Page 3: Grinder Safety Warnings
When operating a power tool outdoors, use an Maintain power tools. Check for misalignment extension cord suitable for outdoor use. Use of or binding of moving parts, breakage of parts a cord suitable for outdoor use reduces the risk of and any other condition that may affect the electric shock. - Page 4 The wheel may either jump toward or away from the accessory is dropped, inspect for damage or install an undamaged accessory. After inspect- operator, depending on direction of the wheel’s move- ing and installing an accessory, position your- ment at the point of pinching. Abrasive wheels may also self and bystanders away from the plane of break under these conditions.
-
Page 5: Functional Description
Additional Safety Warnings: FUNCTIONAL When using depressed centre grinding wheels, be sure to use only fiberglass-reinforced DESCRIPTION wheels. NEVER USE Stone Cup type wheels with this grinder. This grinder is not designed for these CAUTION: Always be sure that the tool is types of wheels and the use of such a product switched off and unplugged before adjusting or may result in serious personal injury. - Page 6 Installing side grip (handle) so that the closed side of the guard always points toward the operator. Optional accessory for M9509 in some countries CAUTION: Make sure that the mounting part CAUTION:...
-
Page 7: Operation
With side grip OPERATION optional accessory for M9509 in some countries ALWAYS hold the tool firmly with one hand on housing WARNING: It should never be necessary to and the other on the side grip. force the tool. The weight of the tool applies ade- quate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. - Page 8 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885529-930 20160629 www.makita.com...