Makita M9502R Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Grinder
  5. M9502R
  6. Instruction manual

Makita M9502R Instruction Manual

Hide thumbs Also See for M9502R:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Angle Grinder
M9502R
M9503R
DOUBLE INSULATION
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita M9502R

Summary of Contents for Makita M9502R

  • Page 1 INSTRUCTION MANUAL Angle Grinder M9502R M9503R DOUBLE INSULATION Read before use.

  • Page 2: Specifications

    Wear ear protection. Read instruction manual. Vibration The vibration total value (tri-axial vector sum) deter- Wear safety glasses. mined according to EN60745: Model M9502R DOUBLE INSULATION Work mode: surface grinding Vibration emission (a ) : 6.5 m/s h, AG Uncertainty (K) : 1.5 m/s...

  • Page 3: Ec Declaration Of Conformity

    (RCD) protected supply. Use of an RCD reduces the risk of electric shock. For European countries only Makita declares that the following Machine(s): Use of power supply via an RCD with a rated residual Designation of Machine: Angle Grinder current of 30 mA or less is always recommended.

  • Page 4: Grinder Safety Warnings

    Use the power tool, accessories and tool bits etc. The dust mask or respirator must be capable of in accordance with these instructions, taking into filtrating particles generated by your operation. account the working conditions and the work to be Prolonged exposure to high intensity noise may performed.

  • Page 5: Functional Description

    Use special care when working corners, sharp 10. Do not use separate reducing bushings or edges etc. Avoid bouncing and snagging the adaptors to adapt large hole abrasive wheels. accessory. Corners, sharp edges or bouncing Use only flanges specified for this tool. have a tendency to snag the rotating accessory 12.
  • Page 6 Screw the side grip securely on the position of the tool Switch action as shown in the figure. CAUTION: Before plugging in the tool, always check to see that the slide switch actuates prop- erly and returns to the "OFF" position when the rear of the slide switch is depressed.

  • Page 7: Grinding Operation

    Make sure to fit the dented part of the inner flange onto CAUTION: Never switch on the tool when it is in con- the straight part at the bottom of the spindle. tact with the workpiece, it may cause an injury to operator. Fit the depressed center wheel on the inner flange and screw the lock nut onto the spindle.
  • Page 8 ► 1. Brush holder cap To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Makita Europe N.V. Jan-Baptist Vinkstraat 2,...

This manual is also suitable for:

M9503r

Table of Contents