Mira Select Flex Installation And User Manual page 18

22. Check that the blue 'O' seal is fitted inside the
backplate nut. Fit the olive and the backplate
nut over the outlet pipe and tighten the nut.
23. Check that the second 'O' seal (black) is fitted
to the outside of the backplate nut. Press
the elbow onto the backplate, make sure
that the clips on the elbow engage with the
backplate.
24. Press the shroud over the elbow, make
sure that it engages with the lugs on the
backplate.
olive
25. this completes the installation of the rac
assembly, fit the concealing plate and
control assembly. refer to section: 'Control
Assembly'.
rac Backplate
Backplate
Screws
Backplate nut
elbow
Shroud
18