Mira Select Flex Installation And User Manual page 15

13. Refit the building-in shroud to the mixer using
the two shroud screws removed earlier.
14. Using the 'Finished Wall indicator' on the
building-in shroud as a guide, finish the wall,
e.g. tiles.
Caution! Make sure that the finished wall
is within the maximum and minimum limits
and to an even depth (no greater than 2 mm
variation) or the control components will not fit
correctly.
Minimum
finished wall
surface
Maximum
finished wall
surface
15. remove the two shroud screws (retain for later
use) and remove the building-in shroud.
16. Fit the concealing plate and control assembly,
refer to section: 'Control Assembly'.
Finished Wall
F9802
Min
Max
15