Fcc Notice - Radio Shack PRO-2050 Owner's Manual

20-430.fm Page 4 Wednesday, August 4, 1999 1:29 PM
Your PRO-2050 scanner can receive
all of these bands:
Frequency
Range Transmissions
29–29.7 MHz 10-Meter Amateur
29.7–50 MHz
50–54 MHz 6-Meter Ham Band
108–136.975
MHz
137–144 MHz Military Land Mobile
144–148 MHz 2-Meter Ham Band
148–174 MHz
406–420 MHz
Government
420–450 MHz 70-cm Ham Band
450–470 MHz UHF Standard Band
470–512 MHz UHF "T" Band
806–824 MHz Public Service "800"
851–869 MHz
896–956 MHz Cellular Band
Note: See "Specifications" on Page 51
for more information about the scan-
ner's frequency steps.
4

FCC NOTICE

Your scanner might cause TV or radio
interference even when it is operating
Types of
properly. To determine if your scanner
is causing the interference, turn off
your scanner. If the interference goes
Radio
away, your scanner is causing it. Try
to eliminate the interference by:
VHF Lo
Aircraft
VHF Hi
If you cannot eliminate the interfer-
Federal
ence, the FCC requires that you stop
using your scanner.
This device complies with Part 15 of
the FCC Rules . Operation is subject to
the following two conditions: (1) This
device may not cause harmful interfer-
ence, and (2) this device must accept
except
any interference received, including
interference that may cause undesired
operation.
We recommend you record your scan-
ner's serial number here. The number
is on the scanner's back panel.
Serial Number _________________
• Moving your scanner away from
the receiver
• Connecting your scanner to an
outlet that is on a different electri-
cal circuit from the receiver
• Contacting your
dioShack store for help
local Ra-