Fcc Notice - Radio Shack PRO-2050 Owner's Manual

Your PRO-2050 scanner can receive
all of these bands:
Frequency
Range
29–29.7 MHz
29.7–50 MHz
50–54 MHz
108–136.975
MHz
137–144 MHz
144–148 MHz
148–174 MHz
406–420 MHz
420–450 MHz
450–470 MHz
470–512 MHz
806–824 MHz
851–869 MHz
896–956 MHz
Note: See "Specifications" on Page 51
for more information about the scan-
ner's frequency steps.
4
Types of
Transmissions
10-Meter Amateur
Radio
VHF Lo
6-Meter Ham Band
Aircraft
Military Land Mobile
2-Meter Ham Band
VHF Hi
Federal
Government
70-cm Ham Band
UHF Standard Band
UHF "T" Band
Public Service "800"
except
Cellular Band

FCC NOTICE

Your scanner might cause TV or radio
interference even when it is operating
properly. To determine if your scanner
is causing the interference, turn off
your scanner. If the interference goes
away, your scanner is causing it. Try
to eliminate the interference by:
• Moving your scanner away from
the receiver
• Connecting your scanner to an
outlet that is on a different electri-
cal circuit from the receiver
• Contacting
dioShack store for help
If you cannot eliminate the interfer-
ence, the FCC requires that you stop
using your scanner.
This device complies with Part 15 of
the FCC Rules . Operation is subject to
the following two conditions: (1) This
device may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
We recommend you record your scan-
ner's serial number here. The number
is on the scanner's back panel.
Serial Number _________________
your local Ra-