Radio Shack PRO-2050 Owner's Manual page 47

20-430.fm Page 47 Wednesday, August 4, 1999 1:29 PM
PROBLEM
Scanner will not track a
trunked system.
PROBLEM
(continued)
Scanner will not stop
while scanning a scan
list.
Scanner will not acquire
a data channel.
Missing replies to con-
versations.
POSSIBLE CAUSE
The data frequency is
missing.
POSSIBLE CAUSE
The system you are try-
ing to track is a Type I
system, and the scanner
is set to scan Type II sys-
tems.
No IDs have been
stored.
The IDs you have stored
are not active.
is not cor-
SQUELCH
rectly adjusted for trunk
tracking.
The frequency used for
the data channel is miss-
ing.
The system you are try-
ing to track is a Type I
system, and the scanner
is set to scan Type II sys-
tems.
REMEDY
Find the data frequency
(see "Programming
REMEDY
Trunked Frequencies" on
Page 26).
Set the scanner to
receive Type I trunked
frequencies. See "Scan-
ning Type I and Hybrid
Trunked Systems" on
Page 33.
Store one or more IDs
(see "Scan Lists" on
Page 31).
Scan another transmis-
sion.
Adjust squelch for trunk
tracking. See "Setting
Squelch for the Trunk
Tracking Mode" on
Page 26.
Add the frequency used
for the data channel to
the frequency list. (see
"Programming Trunked
Frequencies" on
Page 26).
Set the scanner to
receive Type I trunked
frequencies. See "Scan-
ning Type I and Hybrid
Trunked Systems" on
Page 33.
47