Searching Service Banks - Radio Shack PRO-2050 Owner's Manual

20-430.fm Page 18 Wednesday, August 4, 1999 1:29 PM
3. Press to store the frequency into
E
the channel.
Notes:
• If you made a mistake in Step
2, Error appears and the
scanner beeps when you press
. Simply start again from Step
E
2.
• Your scanner
rounds the entered frequency to
the nearest valid frequency. For
example, if you enter a fre-
quency of 151.473, your scan-
ner accepts it as 151.475.
• If you entered a frequency that
is already stored in another
channel, the scanner beeps
three times and displays the
lowest channel number where
the frequency is already stored.
If you want to store the fre-
quency anyway, press
• Press if you want the
DELAY
scanner to pause 2 seconds on
this channel after a transmis-
sion ends before it proceeds to
the next channel (see "Delay"
on Page 21). The scanner also
18
4. If you want to program the next
SEARCHING SERVICE
BANKS
You can search for public service, po-
lice,
weather transmissions even if you do
not know the specific frequencies that
are used in your area. And, you can
store any of the frequencies you find
into channels.
Your scanner has the following pre-
programmed service banks.
automatically
• PUBLIC — contains 140 public
• POLICE — contains 2,392 police
• FIRE/EMG — contains 197 fire
• AIR — contains 2,319 aircraft and
• WX — contains 7 weather fre-
again.
E
To select a service bank, press
service bank's name (
LICE
one of the preset public service fre-
quencies appear. After a 2-second de-
lay, searching begins.
stores this setting in the chan-
nel.
channel in sequence, press
and repeat Steps 2 and 3.
UAL
fire/emergency, aircraft,
service frequencies
frequencies
and emergency service frequen-
cies
air service frequencies
quencies
PUB, PO-
, FIRE/EMG , AIR , or
MAN-
and
. A
SVC
WX ) and