Using Priority; Using The Display Backlight - Radio Shack PRO-82 Owner's Manual

±
"016'"
If you program a
weather frequency
into the priority
channel and the
scanner detects a WX
alert tone on that
frequency (see "WX
Alert" on Page 32),
the scanner sounds
the alert tone and
7B;hj 7B;hj
7B;hj 7B;hj
flashes. Press
any key to turn off the
alarm.
36
7UKPI"2TKQTKV[
The priority feature lets you scan
through channels and still not miss
important or interesting calls on a
frequency you select. You can
program one frequency into the
priority channel. As the scanner
scans, if the priority feature is
turned on, the scanner checks the
priority channel for activity every 2
seconds. ±
1. Press
2. Enter the frequency you want
±
"
To turn on the priority feature,
press
or searching.
scanner checks the priority
channel every 2 seconds and
stays on the channel if there is
activity.
appear whenever the scanner is
set to the priority channel.
To turn off the priority feature,
press
7UKPI"VJG"&KURNC["
$CEMNKIJV
You can turn on the display's
backlight for easy viewing in the
dark. Press
the light for 5 seconds. To turn off
the light sooner, press
again.
Press both
turn on the display's backlight for
, then press
PGM
F9> F9>
F9> F9>
. and
ALERT
the previously-stored
frequency appear.
to enter into the priority
channel, then press
display flashes twice.
PRI/ALERT
FH? FH?
FH? FH?
appears. The
F9> F9>
F9> F9>
and the frequency
.
PRI/ALERT
/
and
PGM
PRI/
&&&$&&&& &&&$&&&&
&&&$&&&& &&&$&&&&
or
. The
ENT
during scanning
FH? FH?
FH? FH?
disappears.
to turn on
/
/ to