Clearing A Stored Channel; Listening To The Marine Bank - Radio Shack PRO-82 Owner's Manual

30
channel and do not want to miss
any details – even though there
might be periods of silence – or if
you simply want to monitor that
channel.
Follow these steps to manually
select a channel.
1. Repeatedly press
C7D C7D C7D C7D
until
2. Enter the channel number
(1-200).
3. Press
SCAN/MAN
%NGCTKPI"C"5VQTGF"%JCPPGN
If you no longer want a frequency
stored in a channel (and you do
not want to replace that frequency
with a different one), follow these
steps to clear the stored
frequency.
1. Press
SCAN/MAN
scanning.
2. Use the number keys to enter
the channel number (1-200)
you want to clear.
3. Press
PGM
4. Press then
0
frequency number changes to
&&&$&&&& &&&$&&&&
&&&$&&&& &&&$&&&&
channel is cleared.
.KUVGPKPI"VQ"VJG"
/CTKPG"$CPM
To listen to the marine bank, press
C7h C7h
C7h C7h
. appears for about 2
MAR
seconds, then the scanner starts
searching from marine channel 16.
SCAN/MAN
appears.
again.
to stop
F=C F=C
F=C F=C
. appears.
. The
ENT
to indicate the