Radio Shack PRO-82 Owner's Manual page 40

±
"016'"
If the scanner did not
receive a start or end
bit respect-ively from
Ij7hj Ij7hj
Ij7hj Ij7hj
the PC, and
do not appear.
40
±
"
3. Using the software supplied
;dZ ;dZ
;dZ ;dZ
4. While pressing
5. When the scanner
then connect the other end of
the cable to
scanner.
with the programming kit,
configure the software to work
with your scanner by clicking
on , selecting
Tools
Configuration
.
PRO-89
turn on the scanner.
M_h;Zý M_h;Zý M_h;Zý M_h;Zý
appear. Then send the
data from the PC.
the data being received by the
scanner appears in the order
it is received. ±
successfully receives all data,
;dZ ;dZ <_d_I^ý <_d_I^ý
;dZ ;dZ <_d_I^ý <_d_I^ý
and
scanner received an error
while receiving data,
Z#;hh Z#;hh
Z#;hh Z#;hh
appear. If the scanner
received a checksum error
while receiving data,
a number shown next to
indicates the packet number
where the error occurred. ±
on top of the
, then selecting
and ,
ENT 9
F=C F=C
F=C F=C
and
Ij7hj Ij7hj Ij7hj Ij7hj
and
appear. If the
;dZ ;dZ
;dZ ;dZ
and
9#;hh 9#;hh 9#;hh 9#;hh
and
9#;hh 9#;hh 9#;hh 9#;hh