Tuning Preprogrammed Shortwave Stations - Radio Shack DX-398 Owner's Manual

Notes:
• When scanning, the receiver only
searches for frequencies with
strong signals. To search for sta-
tions with weaker signals, use one
of the manual tuning methods.
• When scanning in a lower band,
the receiver searches only within
the selected band and stops at the
upper and lower limits of the band.
• Your receiver shows the short-
wave bands you can receive on
the bottom of the display.
TUNING
PREPROGRAMMED
SHORTWAVE STATIONS
Your receiver is preprogrammed with
212 of the most popular worldwide
and U.S. shortwave stations. You can
quickly tune these popular stations.
Notes:
• You cannot change the preset
shortwave stations stored in your
receiver's memory.
• You can store shortwave frequen-
cies into the receiver's empty
20
memory locations. See "Storing
SW Frequencies in Memory" on
Page 28 for more information.
• International commercial broad-
cast programs (often in English)
usually contain news, commentar-
ies, music, and special features
reflecting the culture of the broad-
casting country. Reception for this
range is best between 6:00 PM
and midnight (your time).
Follow these steps to tune prepro-
grammed shortwave stations.
1. Find the country and frequency for
the shortwave station you want to
tune in the "DX-398 Shortwave
Pages Chart" on Page 21. Then
write down the page number and
memory location number shown
on the chart for that station.
2. Press then press
SW,
3. While PAGE is flashing, repeat-
edly press
TUNING
or turn
MANUAL TUNING
the page number you wrote down
in Step 1 appears next to
The name of the broadcaster's
country also appears next to
PAGE .
Then, when you reach the desired
page number, press
4. Press a number key to enter the
memory location number you
wrote down in Step 1. The re-
ceiver tunes the station.
.
PAGE
or
TUNING
until
.
PAGE
.
ENTER