Radio Shack DX-398 Owner's Manual page 14

— selects the MW (medium wave) band and lets you select MW stations
ATS/MW
using your receiver's automatic tuning system.
— selects the SW (shortwave) band, and lets you scan for a shortwave
METER/SW
frequency in one of the receiver's 14 meter bands.
Number Keys — each key has a single-digit label and a band range. The single
digits are used to enter a channel, frequency, or ID number. The band range
(120m, for example) indicates the shortwave band you can tune by pressing that
key.
• — enters a decimal point or clears an incorrect entry.
(cancel) — cancels an entry.
C
(frequency) — lets you tune a frequency directly.
F/FREQ
— stores frequencies into memory.
M/MEM
— enters a frequency.
ENTER
TIMER 1, TIMER 2, TIMER 3
— lets you select the time you want to display (world time or your
WORLD/HOME
home time).
— lets you set up the alarm timer.
AM MODE
M
— lets you lock out selected frequencies.
— lets you assign a name for each FM, MW, or LW station or for each page
EDIT
where you stored an SW station.
— lets you select either of the receiver's memory pages (see "Memory Func-
PAGE
tions" on Page 27).
— tunes to the priority station you set.
PRIORITY
— tunes up or down the band you selected.
TUNING /
14
— let you select any of the receiver's three timers.