Table of Contents
Advertisement
72
EEPROM Status
Command: SE
SE returns the EEPROM status.
Response:
T=t CE=ee
Format:
t
= 0, No Timeout Error; t = 1, Timeout Error
ee
= Number of corrected errors in reading EEPROM data
Receiver Status
Command: SR
SR returns the current receiver status.
Response:
V=vv S=ss T=t P=Off E=0
Format:
vv
= number of satellites, visible to the antenna, per almanac.
ss
= relative signal strength (range: 0 to 255, nominal value = 15)
t
= number of satellites being actively tracked (up to twelve)
P
= Off, indicates that the time dilution of precision (TDOP)
C
calculation is not being performed. Returns 1.0 - 99.0, depending
on satellite geometry, when TDOP calculation is being performed.
A TDOP calculation is NOT performed if less than 3 satellites are
visible, OR if Position-Hold is active. E = 0, currently unused.
Serial Communication and Command Set
Advertisement
Table of Contents
Need help?
Do you have a question about the 1084A and is the answer not in the manual?