Arbiter Systems 1084A Operation Manuals page 201

C.19 Option 34: NTP/PTP Server
Server Status – Synchronization problem on Option 34
NTP: ERROR
PTP: ERROR
After the Clock and Server Have Stabilized
After the GPS clock and NTP/PTP server have stabilized, press the Status button to view server
status, link status and port addresses (IP and MAC address).
Server Status
NTP: SYNCHRONIZED
PTP: RUNNING
Link Status – indicates whether the network connection is good or bad.
NET1:
NET2:
Port Address:
NET1:192.168.000.232
64:73:E2:XX:XX:XX
To Determine IP Address for 1093A/1084A
For clocks without a display, type "IP" at the terminal window, as explained in Section C.19.2,
and the clock should return the IP and MAC addresses for both ports in separate lines.
Option 34 LED Indications
To view the Option 34 Status LEDs, see the Option 34 rear panel. The figure and Table C.15 below
describe the indications.
GOOD LINK
BAD LINK
LED Name Color
LINK Steady Green
Steady Yellow
OFF
SYNC Steady Green
OFF
ERROR Red
OFF
Table C.15: Option 34 LED Indications
Meaning
Good Link, 10 Mb/s
Good Link, 100 Mb/s
Bad Link
NTP Server Synchronized
NTP Server not Synchronized
Startup/Error
No Errors
181