Table of Contents
Advertisement
7.5 Default Settings
Previously entered changes can be undone, and the default
settings can be reactivated. This may be advisable under the
following circumstances:
• after the occurrence of software or hardware errors,
• if you are under the impression that the multimeter does not
work correctly.
➭ Disconnect the device from the measuring circuit.
➭ Remove the batteries temporarily (see also chapter 10.2).
➭ Simultaneously press and hold the
keys, and connect the battery at the same time.
GMC-I Messtechnik GmbH
ZERO
ON / OFF
and
ESC
LIGHT
Device and Measuring Parameters
57
Advertisement
Table of Contents
Need help?
Do you have a question about the METRAHIT T-COM PLUS and is the answer not in the manual?