Checking For Limit Failures; Limits Checking Results - HP EPM-441A User Manual

Figure 2-7: Limits Checking Results
Amplitude
+10 dBm
o
o
o
+4 dBm
In this application a swept frequency signal is applied to the input of the
Device Under Test. The power meter measures the output power. The
limits have been set at +4 dBm and +10 dBm. A fail occurs each time the
output power is outside these limits as shown in Figure 2-7.

Checking for Limit Failures

Limit failures are displayed in the appropriate field in the measurement
window on the power meter's display as shown in Figure 2-8.
HP EPM-441A User's Guide
Fail
o
o
o
o
Fail
Frequency
Power Meter Operation
Setting Measurement Limits
2-31