Geeetech A30 User Manual page 46

Note:
 If you choose a Wi-Fi hotspot without password, click ―Next‖ and continue your
setting from step7.
 During the above config process, your Phone is connected to the GT-printer wifi
hotspot, which has no access to the internet connection. So you will be logged out.
After your successful config., your phone will be connected to your previous
network automatically. If not, please connect it manually and log in to EasyPrint 3D
again.
 If you are asked to switch the network during the wifi config, please choose NO to
stay with the GT-printer wi-Fi network, as shown in the following picture.
45