Move - Geeetech A30 User Manual

1) When the printer is running with a TF card or connected with a computer, clicking
on the [Home] menu is disabled. This situation also applies to the [Disable] status of the
stepper motors.
2) When the printer is idle, you can click
axis respectively. Besides, it is efficient to click
simultaneously.
3) Choose the

2.2.2 Move

1) When the printer is running with a TF card or connected with a computer, clicking
on the [Move] menu is disabled. This situation also applies to the [Disable] status of the
button to get to the [Move] interface.
9
to home X/Y/Z
to home the three axises