Table of Contents
Advertisement
Switching On
If the RED LED is unlit check that the plug is connected to the power supply. If the picture does not
appear press
on the remote control, it may take a few moments.
To put the television into Standby press
on the remote control. To view the television press
again. The picture may take a few seconds to appear.
Using the Remote Control
To set up the television you will now need to use the on screen menus. Press MENU on the remote
control to see the menus.
The on-screen menu appears as a list of five topics. As each symbol is selected by pressing ▲ or ▼
on the navigation ring on the remote control, its respective options will appear right side.
To use the options, press
to enter the sub menu. Then press ▲ or ▼ on the navigation ring to
move up and down through them and use
or to select the required choice. Follow the on-screen
instructions. The functions of each menu are described in detail throughout the manual.
Using the Side-Key Controls
To change the volume, press
.
P
To alter the channel, press
.
Press MENU and ▲ or ▼, ◄ or ► to control the sound and picture options.
Press MENU to finish.
To select an external input, press
and then use ▲ or ▼ to move through the list until the appro-
priate input source is selected.
Please always refer to the owner's manual of the equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the sound from all speakers.
18
Advertisement
Table of Contents
