Table of Contents
Advertisement
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear of the television.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the
television.
The phono sockets alongside the VIDEO INPUT socket will accept L and R audio signals. These sock-
ets are located on the side of the TV.
HDMI
(High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
®
with digital audio and video output. It is designed for best performance with 1080i high-definition video
signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support
VGA, SVGA, XGA, WXGA and SXGA.
Note: Although this television is able to connect to HDMI equipment it is possible that some equipment
may not operate correctly.
A wide variety of external equipment can be connected to the back of the television, therefore
the relevant owners manuals for all additional equipment must be referred to.
If the television automatically switches over to monitor external equipment, return to normal television
by pressing the desired channel button. To recall external equipment, press
to select.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
8
Advertisement
Table of Contents
