Ford F-150 2018 Owner's Manual page 63

Hide thumbs Also See for F-150 2018:
Table of Contents

Advertisement

Remote Start
(If Equipped)
WARNING
To avoid exhaust fumes, do not use
remote start if your vehicle is parked
indoors or in areas that are not well
ventilated.
Note: Do not use remote start if your fuel
level is low.
The remote start button is on the
transmitter.
E138625
This feature allows you to start your
vehicle from the outside. The transmitter
has an extended operating range.
If your vehicle has automatic climate
control, you can configure it to operate
when you remote start your vehicle. See
Climate Control (page 141). A manual
climate control system will run at the
setting it was set to when you switched
your vehicle off.
Many states and provinces have
restrictions for the use of remote start.
Check your local and state or provincial
laws for specific requirements regarding
remote start systems.
The remote start system does not work if:
The ignition is on.
The alarm system triggers.
You disable the feature.
The hood is open.
The transmission is not in park (P).
The vehicle battery voltage is too low.
The service engine soon light is on.
Remote Control Feedback (If
Equipped)
An LED on the remote control provides
status feedback of remote start or stop
commands.
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201709, Second Printing
Keys and Remote Controls
LED
Solid green
Solid red
Blinking red
Blinking green
Remote Starting your Vehicle
Note: You must press each button within
three seconds of each other. If you do not
follow this sequence, your vehicle does not
start remotely, the direction indicators do
not flash twice and the horn does not sound.
E138626
The label on your transmitter details the
starting procedure.
To remote start your vehicle:
1.
Press the lock button to lock all the
doors.
2. Press the remote start button twice.
The exterior lamps flash twice.
The horn sounds if the system fails to start.
Note: You must press the push button
ignition switch on the instrument panel once
while applying the brake pedal before
driving your vehicle.
60
Status
Remote start
successful
Remote stop
successful
Request failed or
status not received
Status incomplete

Advertisement

Table of Contents
loading

Table of Contents